1.  The following Colt grips for the Colt Python or any "I" frame revolver are flat out incredible.  They are made from American Walnut obtained from Colt factory stock and recreated by a retired Colt master grip maker using genuine Colt fixtures and cutters.  They are beautifully, perfectly checkered in Fleur De Lis pattern, straight pattern and plain checkered. For exacting restoration jobs these grips are the perfect final touch.

The 1903 Fleur Di Lis, Mother Of Pearl revolver grips are original right down to the correct Colt medallion and 1903 pistol Mother Of Pearl grips are original with the correct Colt medallion.

All grip screws are as the originals.

Prices range from $300.00 to $350.00 as shown below.

2. Remington model 700 fully adjustable trigger. I do not know the origin of this trigger; it could be a take-off or a match grade trigger, but it is fully adjustable for weight, engagement and overtravel housed in a steel body. Even the simplest Remington sells for $120.00 plus.  This trigger is priced at...$35.00.
 
 

  3.  Neidner checkered steel grip caps (5 total)  The Neidner checkered plates retail for $24.00 in the Brownells catalogue but I  will sell them for $15.00 apiece or all 5 for $65.00.  (The silver, brass and buffalo caps shown are sold.) Add $5.00 shipping
 
 

4.   One Caspian slide for 9mm or 38 Super with a BoMar rear sight cut, dovetail front sight cut, fishscales for cocking serrations and Fishscaling on the top rib. The slide was used to practice applying fishscales and there are a few minor defects. The slide without the fishscales sells for $255.00 and the fishscaling is $180.00 for a total value of $435.00 but will sell for...$315.00.
 

5.  C-More Serendipity, Slide-Ride Red Dot Scope, new in the original box. This really fine red dot scope is designed to be installed on a standard model 1911 frame using three screws on each side.  These scopes are proven performers, can withstand considerable abuse and recoil and have been installed on thousands of model 1911 pistols over the last 20 years...$240.00 plus shipping.
 
 

  6. Sling swivel  studs: The three in the white (there are actually five) machined from solid bar stock with high top head screws that can be cut flush or domed are for mounting in a butt stock for a sleek custom look. They will accept Michaels and other quick release sling swivels  and will not allow the swivels to touch and mar the wood.  Brownells sells these for $30.00, but I will sell them for $20.00 apiece.
 
 
 

        **One single barrel band swivel stud pictured has a .650" inside diameter and retails for $55.00, but your cost on this one is $35.00.

**Two blue single barrel band swivel studs have a .780" and .850" inside diameter.  They retail for $55.00...$30.00 apiece.

7. Six STI new, never used high capacity magazines. These new magazines sell for $60.00 apiece new, but I will sell them for $50.00 apiece.  Only three left; one 10mm, one 9X23, and one 40 Smith & Wesson.
 

 9.  Three sets of Bill Wilson diamond checkered walnut grips for the model 1911 with the Wilson logo imbedded...normally $57.00 now, $35.00 per set.
 
 

  10. One set of new Browning High Power pistol grips with Old Man Death laser engraved on both grips.  The grips are a little too fat for me so I am selling them for... $45.00 a $65.00 value!
 
 

11. Three sets of new "take-off" grips made by Pachmeyer for the Smith & Wesson large "N" frame revolver...$10.00 per grip plus shipping.

12. Colt "I" frame factory grip.  This is a new "take-off" grip..$15.00 plus shipping.

13. Colt "D" frame factory grip with gold Colt medallion...$40.00 plus shipping.

1145. Miscellaneous grips for S&W "J" frame, S&W and unknowns probably S&W...$30.00 for all plus shipping.
 
 
 

  ITEMS SUCH AS ACTIONS OR ANYTHING WITH A SERIAL NUMBER WILL HAVE TO BE SOLD THROUGH A FEDERAL LICENSED DEALER IN YOUR AREA.