^{THIS PAGE CONTAINS NEW,  HIGH QUALITY SINGLE ACTION single action revolvers MADE BY U. S. FIREARMS IN HARTFORD, CT. ORIGINALLY LOCATED IN THE SAME BUILDING ORIGINAL COLTS WERE MADE FOR OVER A HUNDRED YEARS, BUT NOW GROWN TO A POINT WHERE THEY HAVE TO HAVE A LARGER, more MODERN FACILITY. THE OLD COLT BUILDING UNDER THE BLUE DOME has been TURNED INTO, believe it or not,  CONDOMINIUMS.  Yep, you heard that right, condos! However, The "radiant" blue dome still stands as a monument to American ingenuity.}

^{These FINE SAA'S ARE EQUAL TO AND ACTUALLY SURPASS THE QUALITY OF ORIGINAL COLT 1st AND 2nd GENERATION GUNS. THIRD GENERATION COLTS, SELLING FOR THE SAME PRICES  AS THE GUNS LISTED BELOW, ARE VERY POOR QUALITY AND ARE NO LONGER IN THE BALL GAME.   Of course, the name "Colt" still rules, but if you want ultimate "American quality," a United States firearms single action is what you need to buy.} 
 

Ten-Ring Precision, Inc. is the nation's number one retailer of  fine United States Firearms single actions.  We stock more USFA's than any other store, retail or wholesale, in the United States.  Not only that, we do gunsmithing, fit cylinders in 45 ACP, 44 special or 44WCF (44-40) plus perform any custom work you would like.  We lean toward the hard-to-find models and lots of high-end stuff, but usually have beautiful soft nickel Rodeo II's and matte blued Rodeo I's in stock.  Rodeo I models are sold out at this time.

If you want one of these superlative single actions and do not see it listed below you may place a special order for a non refundable $100.00 deposit.  Waiting time for special orders usually runs around 90 days, but at this time could run six months or more.  This is a common, historical problem in the American firearms industry.  Quality products take time.
 
 

NOTE,   US Firearms production is slow due to heavy demand and stringent quality control. Each and every part is cut from solid bar stock in Hartford, Connecticut and hand fitted to perfection.  These fine single actions are 100% American made and carry a lifetime warranty from the manufacturer.  If you would like to own one of these really outstanding six-guns and you do not see what you would like in stock, please consider placing an order and getting in line for one.  You can call 210-494-3063, place a deposit of $100.00 and just let me know which model you would like.  I will call when it comes in and ship to your Federally licensed dealer.
 
 

Rodeo I and Rodeo II models: The rodeo models are the same exquisite quality as all other US Firearms single actions, but have a special glare-reducing glass beaded black finish or, as in the Rodeo II, a soft glass beaded, tough, durable nickel finish. They are 100% American made, like all the others, from solid bar stock, heat treated to exacting specifications, and carry the same manufacturer's lifetime warranty. The springs and internal parts are perfectly heat treated and hand fit to perfection. The rear sight notch is wide and square which matches up the easily picked up matte black front blade.  It is available in .45 Colt, 44 WCF, or .38 Special with  4- 3/4", 5 -/2", or 7-1/2" barrels and hard rubber grips.

Other models are available such as The Gunslinger which is an antique aged single action with genuine gray or brown patina, and the Government Inspector Series with original Colt inspector cartouches on the grips and frame.  And how 'bout an 1888 Flattop Target Model, Bisley, Sheriff's Model, Storekeeper,.22 Plinker, .22 Target, or one of my favorites, the Custer Battlefield.   Want something really cool?  How 'bout a Double Eagle in 44 Special!
 

"SN" = Serial Number (Refer to this number when calling for information.)

    Dual cylinder installation:  If you would like to have a 45 ACP cylinder for your 45 Colt six-gun or a 44 special cylinder for your 44 WCF (44-40) you can send your frame in without the handle and cylinder (this allows you to ship US Mail as gun parts.) for fitting. The cost for this service is $255.00 plus shipping. If you would like to attempt to fit the cylinder yourself the cost of the cylinder will be $235.00 plus shipping.

OEM (Original Equipment Manufactured Colt cylinders.)  If you have a first or second generation Colt needing a new cylinder for restoration to original Colt specs or a caliber change I have new cylinders available in just about any caliber Colt made including 45 Colt, 44 WCF (44-40), 32 WCF (32-20), 44 special, and others. These OEM cylinders are blued.  There are no OEM cylinders for Colt third generation single actions.  Your cost for the cylinder and installation...$255.00. Shipping not included.
 
 

        LAYAWAY  PLAN: If you would like to own one of these fine single actions, but cannot afford to put up the full price at one time you can send a non refundable $100.00 deposit and pay on it for "no more than" six months.  There is no extra charge for this service, however, if you cancel the order after 30 days $100.00 of your deposit will be forfeited.  If you have not paid the balance in the six months allotted, but you still want the gun the balance is due in one payment.  If you cannot pay the balance the total of your payments will be refunded less the $100.00 nonrefundable deposit.

1. (SN- 383DT) (5488)SAA in 44WCF (44-40), 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00.

2. (SN- 518DT) (5485)SAA in 38WCF (38-40), 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00.

  3. (SN- 532DT) (5482)SAA in 44 Special, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00.

4. (SN- 445DT) (5481)SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00. SOLD ON LAYAWAY!  Thank you George. (11-02-11)

5. (SN- 421DT) (5479)SAA in 38 WCF (38-40), 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00.

6. (SN- 586DT) (5480) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00.
 
 

7. (SN- 502DT) (5484) SAA in 44 WCF (44-40), 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00.

8. (SN -SP0069) (5506)SAA in 45 Colt, 5 1/2" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $2,800. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00.

  9. (SN -SP0078) (5505)SAA in 45 Colt, 5 1/2" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $2,800. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00.

10. (SN -SP0021) (5503)SAA in 45 Colt, 7 1/2" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece Walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $3,100. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00.  SOLD ON LAYAWAY!  Thank you George.  09-11

 11. (SN -SP0156) (5509)SAA in 45 Colt, 4 3/4"" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece Walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $3,100. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00.  SOLD ON LAYAWAY! Thank you Carl. (09-1-11) THIS SINGLE ACTION MIGHT BE AVAILABLE MARCH 1, 2012.

12. (SN- 499DT) (5497) SAA in 44 WCF (44-40), 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black   rubber...$1,500.00.

13. (SN- 533DT)(5496) SAA in 44 Special, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00.

14. (SN- 614DT) (5495) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black  rubber...$1,500.00.
 
 
 

15. (SN- 528DT) (5513) SAA in 44WCF (44-40), 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

(NEW NOV, 2011) 16. (SN -SP0197) (5634)SAA in 44 Special, 7 1/2" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece Elephant Ivory which compliments the "C" (75%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $3,400. To have a like revolver constructed from a blank USFA single action would run around $3,800 and up. This rare beauty has a serial number consecutive with the two six-guns below, but may be purchased separately...$2,700.00.

(NEW NOV, 2011) 17. (SN-SP0196)(5635)SAA in 44 Special, 5 1/2" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate/  The grips are rare and beautiful one piece Stag which compliments the high quality "B" (65%) engraving. This is a beautiful single with a serial number consecutive with the single actions above and below, but may be purchased separately...$2.400.00SOLD!  Thank you James.

(NEW NOV, 2011) 18. (SN-SP0195)(5636)SAA in 44 Special, 4 3/4" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate/  The grips are rare and beautiful one piece walnut which compliments the "A" (55%) high quality engraving. This beautiful single has a serial number consecutive with the two single actions above, but may be purchased separately...$2,100.00

19. (SN- 623DT) (5561) SAA in 44WCF (45 Colt), 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

  20. (SN- 643DT) (5562) SAA in 32WCF, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00. SOLD!  Thank you Lou.

21. (SN- 516DT) (5563) SAA in 38WCF, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

 22. (SN- 419DT) (5564) SAA in 38WCF, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

23. (SN- 495DT) (5565) SAA in 44WCF, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.SOLD ON LAYAWAY! Thank you William.  12-05-11
 
 

24. (SN- 415DT) (5566) SAA in 44Special, 7 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

 25. (SN- 536DT) (5567) SAA in 44Special, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

  26. (SN- 497DT) (5568) SAA in 44 WCF, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.SOLD ON LAYAWAY! Thank you William.  12-05-11

 27. (SN- 740DT) (5569) SAA in 44WCF, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

28. (SN- 733DT) (5570) Sheriff Model in 45 COLT, one of a kind 3" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.SOLD ON LAYAWAY!  Thank you Mark.  12-08-11
 
 

29. (SN- 574DT) (5571) SAA in 45 COLT, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.SOLD ON LAYAWAY!  Thank you Anthony.11-28-11

 30. (SN- 455DT) (5573) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

31. (SN- 458DT) (5574) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

 32. (SN -SP0072) (5578)SAA in 45 Colt, 5 1/2" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece Walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $3,100. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00.
 
 

 33. (SN -SP0040) (5579)SAA in 38 Special, 4 3/4" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece Walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $3,100. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00.

(NEW Nov. 2011) 34. (SN -SP0025) (5621)SAA in 45 Colt, 7 1/2"" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece Walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $3,100. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00.
 
 

(NEW Nov. 2011) 35. (SN -SP0024) (5616)SAA in 45 Colt, 7 1/2"" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece Walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $3,100. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00.

  (NEW Nov 2011) 36. (SN- 462DT) (5612) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 
 

(NEW Nov 2011) 37. (SN- 441DT) (5625) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 

(NEW Nov 2011) 38. (SN- 473DT) (5624) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

  (NEW Nov 2011) 39. (SN- 422DT) (5618) SAA in 38 WCF (38-40), 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 
 

(NEW Nov 2011) 40. (SN- 519DT) (5619) SAA in 38 WCF (38-40), 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 
 

(NEW Nov 2011) 41. (SN- 522DT) (5615) SAA in 38 WCF (38-40), 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 
 
 

(NEW Nov 2011) 42. (SN- 522DT) (5615) SAA in 38 WCF (38-40), 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 
 

(NEW Nov 2011) 43. (SN- 546DT) (5620) SAA in 38 WCF (38-40), 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 
 

(NEW Nov 2011) 44. (SN- 564DT) (5623) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.SOLD ON LAYAWAY! Thank you David.  12-08-11.
 
 

(NEW Nov 2011) 45. (SN- 570DT) (5627) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 
 

(NEW Nov 2011) 46. (SN- 596DT) (5617) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.
 
 

(NEW Nov. 2011) 47. (SN -SP0026) (5649) SAA in 44 Special, 4 3/4" barrel, carbona blue (a premium finish), color cased hammer, frame and loading gate. The grips are beautiful one piece Walnut which compliments the "A" (60%) quality engraving.  This is a stunning single action which, if purchased from Turnbull Restorations would cost $3,100. To have a like revolver constructed from a blank USFA single action would run around $3,200 and up.  $2,100.00. SOLD! Thank you Joe.
 

 (NEW DEC. 2011) 48. (SN- 361DT) (5684) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

  (NEW DEC. 2011) 49. (SN- 439DT) (5685) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

(NEW DEC. 2011) 50. (SN- 451DT) (5686) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.SOLD ON LAYAWAY! Thank you Vern.

(NEW DEC. 2011) 51. (SN- 453DT) (5687) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

(NEW DEC. 2011) 52. (SN- 481DT) (5688) SAA in 45 Colt, 5 1/2" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

(NEW DEC. 2011) 53. (SN- 588DT) (5689) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

(NEW DEC. 2011) 54. (SN- 583DT) (5690) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

(NEW DEC. 2011) 55. (SN- 566DT) (5691) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

(NEW DEC. 2011) 56. (SN- 612DT) (5692) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

(NEW DEC. 2011) 57. (SN- 622DT) (5693) SAA in 45 Colt, 4 3/4" barrel, color cased frame, loading gate and hammer, carbona blue (a premium finish) barrel and grip and a nicely engraved Carbona blue cylinder.  The grips are standard hard, black rubber...$1,500.00.

59.. RODEO I models, listed below. The Rodeo models listed below are all 45 Colt caliber unless otherwise stated and are the same excellent quality made with the same hand fitted parts used in the most expensive United States Firearms six-guns. The only difference is in the finish which is soft glass beaded and blued. (Prices do not include shipping to your dealer)

Rodeos in stock are as listed below:
 
 

60.  RODEO II models all in 45 Colt (unless otherwise stated.), durable brushed satin, hard nickel finish, simulated "burl-wood" hard rubber grips, cross pin frame, and 4 3/4" & 5 1/2" barrels. These gorgeous single actions are, without a doubt, some of the most beautiful I have ever seen with stunning frosted nickel finish and blue screws. These revolvers are one of the best values for your money I have seen in the firearms industry in quite some time...$825.00
 
 

 61. (NEW 12-11)  (SN-28358)(5211)PREWAR  FRONTIER SIX-SHOOTER   in 38-40 (38WCF), This is a very special hard to find offering finished in beautiful Armory (charcoal) blue, color case hammer frame and loading gate, cross pin frame and fitted one piece fancy American walnut grips custom fitted, extra fancy one piece walnut grips...$1,759.00.

 62. (SN-59113) (4135)GUNSLINGER in 45 COLT caliber, 5 1/2" barrel, beautiful antique finish, cross pin frame, square sight notch, and hard rubber grips...$1,375.00

  63.  (SN-59203) (4617)GUNSLINGER in 45 Colt, 4 3/4" barrel, cross pin frame, hard rubber grips, and square notch rear sights. This is the antique finish USFA has made so famous and looks like an old aged Colt, but is built to the same exacting standards as all their fine single actions....$1,375.00SOLD ON LAYAWAY! Thank you Terry.  11-22-11
 
 

66. (SN-27103) (4653)SAA Frontier Six Shooter model in 44-40 (44 WCF), 4 3/4" barrel, polished hammer, color cased frame, Dome blue barrel and handle and hard rubber grips...$1,150.00  SOLD!  Thank you Johnnie.

 67.  (SN-27060) (4705)SAA model in 44-40, 5 1/2" barrel, Color case, Dome blue, polished sides hammer, cross pin frame, and magnificent one piece full checkered fancy American Walnut grips...$1,587.00.
 
 

  68.(SN-27143) (4978)SAA model in 32 WCF (32-20), 4 3/4" barrel, color case Dome blue, polished hammer, cross pin frame, and two piece hard rubber grips...$1,150.00.SOLD!  Thank you Tony.
 
 

70.  NEW JANUARY 2012  (SN-28574) (5707)SAA model in 44-40 "FRONTIER SIX SHOOTER" and 44 Special dual cylinder, 5 1/2" barrel, color case Dome blue, color cased hammer, cross pin frame, and two piece hard rubber grips...$1,375.00.

  

 
 

71. (SN-26969) (5470) Flattop Bisley Target Model in 45 Colt, 5 1/2" barrel, bone case and Dome blue colors with a color cased hammer, cross pin frame, and hard rubber grips. This rare target model has a square notch dovetail rear sight drift adjustable for windage and a pinned front blade. The 5 1/2" Bisley is in one of the most popular barrel lengths...$1,825.00 SOLD ON LAYAWAY! Thank you Greg.

 
 

 72. (SN-26970) (5471)Flattop Bisley Target Model in 38 WCF (38-40), 7 1/2" barrel, bone case and Dome blue colors with a color cased hammer, cross pin frame, and hard rubber grips.  This rare target model has a square notch dovetail rear sight drift adjustable for windage and a pinned front blade. This Flattop Bisley is one of the most popular original calibers...$1,825.00SOLD! Thank you Gene.

  73. (SN-26971) (5472)Flattop Bisley Target Model in 38 WCF (38-40), 5 1/2" barrel, bone case and Dome blue colors with a color cased hammer, cross pin frame, and hard rubber grips.  This rare target model has a square notch dovetail rear sight drift adjustable for windage and a pinned front blade. The 5 1/2" Flattop Bisley is in one of the most popular original calibers and barrel lengths...$1,825.00SOLD ON LAYAWAY! Thank you Greg.

 
 
 

74.   (SN-) () CUSTER BATTLEFIELD Model with a beautiful antique finish in 45 Colt, 7 1/2" barrel, one piece custom fitted American black walnut grips with Ainsworth inspector cartouche "A" on left grip, black powder style frame with a screw holding the base pin in place, "US" mark in the left side of the frame and an "A" for inspector Ainsworth on the handle behind the black powder hammer.  These beautiful single actions are recreated as the originals...$1,725.00

SOLD OUT BUT MORE ON ORDER!
 
 

 
 

  75.  (SN-357038) (4096)LEND LEASE in 45ACP (fitted 45 Colt cylinders add $255.00), 5 1/2" barrel, cross pin frame, color case frame and hammer, Armory Blue barrel and handle, and hard rubber grips. This model has the color cased lanyard loop just the original Colts...$1,695.00 SOLD ON LAYAWAY!  Thank you Mark. 11-07-11 (9 mos.)
 
 

76. (SN-357050) (4146)LEND LEASE model in 45 ACP (fitted 45 Colt cylinders add $255.00), color case and Armory blue, cross pin frame, hard rubber grips, and a color case hardened lanyard loop.  The Lend Lease models are made to exacting standards far exceeding the originals with serial numbers picking up where original Colts ended...$1,695.00 SOLD ON LAYAWAY!  Thank you Jason. 12-14-11
 
 

   78.  (SN-27490) (4809)PLINKER, 22 Long Rifle & 22 Magnum,  5 1/2" barrel, finish is Dome blue and color case with a polished hammer.  The grips are hard     black rubber and the frame is a cross pin style...$1,050.00SOLD ON LAYAWAY!  Thank you Mark. 11-07-11 (9 mos.)
 
 

 79. (SN-24780)(4188)SHERIFF Model in 45 Colt, 3 1/2" barrel, black powder "V" notch frame, gorgeous bone case frame, blue barrel and handle, bone color cased hammer (an option), and black hard rubber grips...$1,250.00SOLD ON LAYAWAY! Thank you John.
 
 

80. (SN-26145) (4256) SHERIFF'S MODEL in 45 Colt, 3 1/2" barrel, black powder "V" notch frame, color bone case frame and Dome blue barrel and handle, polished side hammer, black hard rubber grips...$1,150.00   SOLD ON LAYAWAY! Thank you Tom.  (01-30-12)
 
 

81.  (SN-28732) (5614) SHERIFF'S MODEL in 38-40, 3 1/2" barrel, black powder "V" notch frame, color bone case frame and Dome blue barrel and handle, color cased hammer, black hard rubber grips...$1,250.00
 
 
 
 

82. (NEW 12-2011) (SN-28727) (5591)Bisley SHERIFF'S MODEL in 44 Special, 3 1/2" barrel without an ejector rod, cross pin frame, square notch rear sight, bone case frame and Dome blue barrel and handle, color cased birdshead hammer and black hard rubber grips on a unique Bisley style handle.  This is a very unusual "one of a kind" Sheriff's model..$1,585.00 SOLD ON LAYAWAY! Thank you Mark. 11-16-11

  83. (SN-SMD 004) (Sheeran) SHERIFF'S MODEL in 45 Colt, 3 1/2" barrel, black powder "V" notch frame, color bone case frame and Dome blue barrel and handle, polished side hammer, black hard rubber grips and a custom fitted Walnut  case...$1,350.00

SOLD ON LAYAWAY!
 

  84. (SN-26464) (4421)GUNSLINGER/STOREKEEPER model in 44 Special with a 3 1/2"  barrel, cross pin frame, antique finish and custom fitted Ultra Aged Tru Ivory grips, square notch rear sight. The ejector rod is just long enough to move the empty case enough to get a fingernail under the rim...$1,375.00
 
 

86.(SN-59185) (4455) This Storekeeper is a 44 Special with antique finish, 3 1/2" barrel with ejector, custom fitted Ultra Aged Tru-Ivory grips, and cross pin frame...$1,375.00

87. (SN-59193) (4604)Storekeeper in 44 Special with antique finish, custom fitted slightly aged Tru Ivory grips, cross pin frame...$1,375.00.
 
 

88.(SN-28416) (5288)Storekeeper in 44 Special with matte blue finish, 3 1/2" barrel, polished hammer and hard rubber grips...$1,180.00  SOLD ON LAYAWAY!  Thank you Alan. 01-25-12.

 89-. (SN-59179) (4419)Storekeeper in 45 Colt with antique finish, custom fitted ultra aged Tru Ivory grips, cross pin frame...$1,375.00. SOLD ON LAYAWAY!  Thank you Tony.  12-08-11
 
 
 
 
 

  90. (NEW DEC.-2011) (SN-47479) (5673) HENRY NETTLETON CAVALRY, 45 Colt, 7 1/2" barrel, beautiful military polish with bone color case hardening, military polish and Armory blue (Carbona blue).  This fine single action is identical to the original "HN" stamped originals with one piece American walnut grips carrying the famous Henry Nettleton cartouche and 1878 date.  The initials "HN" are on the frame directly behind the hammer, on the hammer, and cylinder plus the "US" mark on the left side of the frame in the same typeface as the original Colt. This is truly one of the finest single actions ever made...$1,695.00 SOLD ON LAYAWAY!  Thank you Kenneth.  12-19-11
 
 

92. NEW and the last, (02-01-2012)(SN-73046) (5600)Double Eagle, 45 Colt, 3 1/2" barrel with ejector, long trigger guard, color case and Dome blue finish and a color cased Birdshead hammer. This new, unique single action is the first, beautifully executed, true hard Gutta Percha rubber Birdshead gripped single action produced since Colt's model 1877.  If you want one of the finest quality, most unique single actions ever made this is it....$1,295.00 SOLD!  Thank you Ron.

93. NEW and the last, (12-22-2011) (SN-73196) (5682)Double Eagle, 45 Colt with a 45 ACP cylinder, 3 1/2" barrel with ejector, long trigger guard, color case and soft wire wheel blue finish and a color cased Birdshead hammer. This new, unique single action is a beautifully executed, custom two piece extra fancy  Walnut Birdshead gripped single action that has not been produced since Colt's model 1877.  If you want one of the finest quality, most unique single actions ever made this is it. I bought two Birdshead hammers from a customer and had USFA build two final Double Eagles. These are very special Double Eagles built from the last remaining parts USFA has and will probably be the last!...$2,150.00   Sorry, no layaway on this one! SOLD! THANK YOU MARK.
 
 
 
 

94. NEW and the last, (12-22-2011) (SN-73197) (5683)Double Eagle, 45 Colt with a 45 ACP cylinder, 3 1/2" barrel with ejector, long trigger guard, color case and soft wire wheel blue finish and a color cased Birdshead hammer. This new, unique single action is a beautifully executed, custom two piece extra fancy  Walnut Birdshead gripped single action that has not been produced since Colt's model 1877.  If you want one of the finest quality, most unique single actions ever made this is it. I bought two Birdshead hammers from a customer and had USFA build two final Double Eagles. These are very special Double Eagles built from the last remaining parts USFA has and will probably be the last!...$2,150.00   Sorry, no layaway on this one! SOLD!  Thank youCraig.
 
 
 
 
 
 

95.  (SN-180431) (5379) USFA Old Armory Original (Special offering) .455 Eley, 45 ACP & 45 Colt with a 7 1/2" barrel. This is a one-of-a-kind special offering from USFA's custom shop. This single action is "period correct" with British proof marks in the original typeface, and British proofs.  This excellent piece is cased in a custom English Oak presentation box with rich green interior and English oak cartridge board. It has a color cased cross pin frame and loading gate with Dome blue barrel, trigger guard and handle.  All surfaces are polished to an ultra high mirror finish. The two piece grips are carved from core Elephant Ivory and the screws beautifully fire blued.  If you like unusual, rare firearms of an exquisite nature this cased, triple cylinder, period correct British contract single action is one you can place on your finest coffee table with pride...$2,250.00.

96. Birdshead Hammers: These hammers are not only beautiful, but they are functional for those of you who cannot reach the tall, stock hammer.  They are all stunningly color case hardened by Turnbull Restorations and should "drop in" your USFA single action...$275.00.